Introduction
1. Auxiliary Shaft
·Automatic tension control: roll diameter could be self-adaptable, which is set in the function of tension-control, with easy operation.
·External auto-deviation device: by supersonic wave, it could respond to the location of the material belt, to ensure location consistency when materials are not even.
2. Cutting& Transfer glue unit
·This set of module team is responsible for cutting dry-inlay, transfer-glue and transfer-glue for wet-inlay.
·Inlay cutters: free-match different blade space, such as two, three, four, six, twelve and so on, which is flexible to match up and easy to install or uninstall.
3. Gluing Unit
·Before this machine starts, firstly, the distance air-cylinder is open and then the gluing head is near to the materials to be printed, Secondly, gluing air cylinder is also open then machine starts to run, which could effectively decrease surplus-glue to be left over when machine begins.
Machine Structure
Features& Advantages
1. Four rows of inlay transfer glue and three transverse cutting speed 100m.
2. The paste gap for inlay transfer glue is less than ±0.5 and the transverse cutting is ±0.2mm.
3. For tag detection, reader& writer could detect the function for chip and if it detects the waste, it will kick off the waste accurately.
4. Sheet-material automatic collecting device could count separately and pack so as to save labor cost and also make next batch of job unwind.
Meanwhile, several rows of roll-slitting rewinding device adopt independent servo control and constant tension not to damage internal chip.
5. It has much stronger extensibility and also these crafts for turning and folding-back to meet different demands such as, single, double and four rows of three-knife transverse cutting.
Applications
This machine could realize RFID tag more layer of materials to be laminated, which are applicable for different ticket-cards in different industry, such as garment, electronic, Medical Treatment and Public Health, logistic, etc.
Aircraft
Garment tag
Ticket
Technical Specification
|
Model |
LQ-MD LC250 |
|
Running speed |
100m/min |
|
The material width |
250mm |
|
Roll diameter |
600mm |
|
Roll weight |
30kg |
|
Gluing width |
230mm |
|
The min stepping distance for tag |
12-200mm |
|
Cutting precision |
≤±0.3mm |
|
Inlay paste precision |
≤±0.5mm |
|
Double layer of laminating precision |
≤±0.4mm |
|
Die-cutting precision |
≤±0.2mm |
|
Power |
AC380-400v 40kw |
|
Overall size |
5600×1500×2300mm |
|
Machine weight |
4000kg |
Hot Tags: lq-md lc250 rfid high-speed laminating and transverse-cutting machine, suppliers, manufacturers, customized, quotation, discount, free sample
