Inkjet printer printheads prone to damage and clogging? Understanding the 6 situations

Aug 05, 2024

Leave a message

It is believed that you in the daily use of inkjet printing machine process, certainly encountered the nozzle easy to damage, clogging, then encountered these situations, we should be how to cope with the processing of it, this article will provide you with a detailed introduction to the corresponding methods.

 

1. Lack of ink

When the lack of ink inside the printhead, the printhead piezoelectric ceramic although the work, but because there is no ink, naturally, can not be effective out of the ink. This situation is generally used to clean the printhead with the pressure of the ink can be.

 

2. Air blockage

Air blockage is a collection of air inside the printhead, the ink can not be properly ejected. Encountering this situation can first try to press the ink cleaning, most cases can be excluded through the ink squeeze air; there is also a situation where the air can not be excluded from the inside of the nozzle, this situation can only be eliminated by waiting for the bubbles and ink fusion automatically eliminated, we are called defoaming.

 

3. Dry or impurities

If the printhead is not used for a long time and there is no effective moisturizing, it is very easy to lead to dry ink inside the printhead. Impurities into the nozzle so that the nozzle clogging and ink drying so that the nozzle is similar to clogging, are solid substances remaining inside the nozzle, resulting in the ink can not be normal through the nozzle.

 

In the slight case, it is possible to press the ink, with the ink impulse to dry ink or impurities flushed out of the nozzle hole; in serious cases, you can use a syringe to absorb cleaning fluid to flush the nozzle, flushing should pay attention to the control of the force, impulse over the General Assembly rose open the nozzle of the adhesive, resulting in the nozzle leakage of ink. If the cleaning fluid can not flush the nozzle, can only use ultrasonic oscillator to vibrate the nozzle to achieve the purpose of cleaning. Special attention should be paid to the fact that the use of ultrasonic waves is risky and may damage the printhead.

 

At the same time, our company also produces inkjet printing machines, such as this LQ-MD UV1450 Digital Inkjet Printing Machine

 

LQ-MD UV1450 high-speed automatic inkjet printer is the latest generation of high-speed inkjet printer, equipped with UV& Water-based piezoelectric head of Japan Ricoh, Konica and other types.

 

This machine is suitable for digital inkjet printing of UV and water-based inks on a single sheet of paper. It is used in barcodes, two-dimensional codes, invisible codes, etc. Digital supervision and electronic traceability, so as to achieve applications such as refined management and intelligent.

Optional printed matter detection, high work efficiency, more user-friendly operation.

 

info-609-186

 

4. Physical damage

In the inkjet printing, if the nozzle hangs to the material or encountered foreign objects, the use of poor-quality scraper or poor-quality ink stacks, moisturizing pads, may damage the surface of the nozzle, resulting in physical damage to the printhead, this damage is irreversible, basically no possibility of repair.

 

5. Circuit damage

Insert the wrong data flat line, power supply abnormalities, ink leakage to the circuit board connected to the printhead, these cases will lead to damage to the printhead, general circuit damage will lead to a large area of the spray hole failure, due to the high degree of integration of the printhead, usually in this case, the printhead directly scrapped, will not be able to use.

 

6. Piezo ceramic aging

The printhead reaches a certain number of times after the work, the control of ink piezoelectric ceramic chip may occur aging, resulting in the normal injection of ink droplets, affecting the quality of inkjet printing. This situation is very rare, the general design of manufacturers of piezoelectric ceramic printhead jet life are more than a few hundred million times, but in practice very few printheads can be used up to a few hundred million times, so in general, are used in the five cases described earlier resulting in the occurrence of nozzle blockage or damage.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!